FUSE Carbon Blade Side Blade 10in 12in Black

In just a few short years, FUSE stabilisers have become a household name among the world's most successful target archers, delivering an unbeatable combination of vibration and noise reduction, strength and durability.

How could FUSE improve on this winning stabiliser.

Like you, FUSE know that archery isn't just a pastime. It's a lifestyle. And to live it to the fullest, you can't waste your precious time on gear that can't keep pace. That's why FUSE engineers its custom accessories to deliver cutting-edge technology and unshakeable performance equated only by your commitment to excel.

Competition in archery tournaments is extremely tough and demanding - so tip the odds in your favour. Outfit your bow with confidence. Conquer the podium with FUSE.

History has been made with Carbon Blade. Stabiliser technology will never be the same. The new FUSE Carbon Blade transcends ordinary stabilisers with capabilities and benefits unmatched by any other stabiliser system. Period.

FUSE engineers used sophisticated real world wind tunnel testing to prove that Carbon Blade generates up to a 70% reduction in cross wind drag, promoting a far faster target acquisition, hold and shot execution in windy conditions than any other available stabiliser.

The FUSE Carbon Blade custom stainless-steel weights are an integral part of the total performance of the Blade stabiliser system, with the unique nested shape promoting even less drag at the critical far end. The included custom Doinker damping unit is also aerodynamically shaped to work in harmony with the Carbon Blade system.

"In theory" wasn't good enough. Fuse tested. Then tested again. FUSE engineers travelled to the world renowned San Diego, California, USA Low Speed Wind Tunnel testing facility to fine tune Carbon Blade's innovative design, solidify their theories, gather critical data and quantify the improved performance of this amazing new system.

The results were astonishing. A measured 70% reduction in drag at wind velocities commonly encountered in outdoor tournament competition, with virtually no change in wind drag all the way past 40 miles per hour or 64 kilometres per hour. Ordinary stabilisers created more than 4 times more drag force in only a 20 mile per hour or 32 kilometre per hour wind gust. This amazing difference directly translates to higher scores.

Extra stiffness in the horizontal plane. Through rigorous lab and field testing and direct feedback from some of the world's best archers. FUSE engineers have optimised the flex pattern of Carbon Blade. The engineered flex pattern maximises horizontal plane stiffness to improve aiming and take total control of the critical launch phase of the shot, the short time when the bow riser must remain stationary while the arrow is departing the bow. Higher effective inertia due to this supreme horizontal plane stiffness also reduces target "float", allowing a more confident, shorter aim time shot, even indoors when you're not fighting the wind. On the other hand, through feedback and testing, it was apparent that top shooters require a more vertically flexible pattern in order to prevent severe recoil, vibration and noise created after the arrow has already left the bow. Carbon Blade's custom flex tuning is the only stabiliser design to address both requirements.

Carbon Blade side blades provide the ideal counterbalance while maintaining the aerodynamics of the Carbon Blade System. This ensures minimum wind drag and optimal inertial control. Custom Blade stainless steel weights allow for custom weight distribution.

With a variety of lengths available, there's sure to be a Carbon Blade waiting to propel you to the podium.

Reo Wilde (USA), the reigning FITA World Champion, has his Fuse Carbon Blade stabiliser system set up with a 30" front bar with 21 ounces and a 10" side bar with 14 ounces on it. "It is designed like a blade, like a sword blade," Reo says. "It cuts through the wind. You've been out in the wind and you know how it feels like your bow torques from the wind blowing on your stabiliser. It seems to eliminate that. You don't feel that torque in your hand of the bow tourquing from the wind on the stabiliser." When asked about the large amount of weight up front, Reo said, "It has always worked better for me that way. If it ain't broke don't fix it."

The Carbon Blade Side Rod comes in 4 sizes to perfectly match your Carbon Blade main blade.

• 203mm or 8"
• 254mm or 10"
• 305mm or 12"
• 381mm or 15"
• We only stock 10" & 12" rods. Please specify length
• The 8" & 15" rods can be special ordered. Please enquire

Side Rod comes in presentation hanger, protective red sleeve or storage bag made from a durable and attractive material to keep your Carbon Blade safe and sound when not in use, 10 page installation instructions and care & maintenance sheet, two Allen wrenches. Protective red sleeve has "Carbon Blade" and "70% Less Wind Drag" emblazoned on both sides and the "FUSE" logo repeated across the whole sleeve and features a draw tie to close.

FUSE oval shaped Carbon Blade stabiliser has

• 70% less wind drag at the critical far end
• Wind-tunnel tested
• Doinker damping unit aerodynamically shaped - the amazing difference that translates to higher scores
• For recurve and compound bows
• Optimised flex pattern
• Higher inertia in horizontal plane stiffness
• Prevents severe recoil, vibration and noise
• A simple concept that will change archery forever
• Completely unique. Completely effective. FUSE completely redefines the stabiliser with the all new Carbon Blade. Never before has a stabiliser made this much difference.
• Tip the odds in your favour with a FUSE Carbon Blade stabiliser

Please note only one stabiliser is being offered for sale here.