Hoyt Altus 38
Brand: Hoyt
The all new Altus is a feature packed revamp. Altus Gets a New Engine. A new colour range, cam option and dual hard lock stabiliser mounts make it the perfect option for those after a no shoot thru target bow. Available in two axle to axle lengths, 35in and 38in. With speed to burn, this could be the bow for you
Hoyt Altus 38 Description
The 2023 Altus gives target and 3D shooters an all round, performance-driven tournament bow. With an axle to axle length of 38", the Altus 38 is able to fit draw lengths of 24.25"-31". The all new HBT Cam System makes this bow extremely adjustable - helping archers achieve the perfect setup to put them on top of the podium.
Your introduction to the podium
Loaded with Hoyt technologies, the Altus is a high performance tournament bow offered at a fraction of the price of typical tournament bows. And with more adjustability than ever thanks to the HBT Cam, Altus 38 can be dialled to a quarter of an inch draw length positions set at 65, 70 or 75% let off and a choice of a hard or soft wall to achieve the fit and feel where you shoot your best.
HBT cam system
The pinnacle of performance and adjustability. The HBT cam represents the biggest change to Hoyt target cams in over two decades. The HBT features quarter-inch draw length adjustments, adjustable let-off between 65, 70 and 75% and the ability to change between a soft or hard wall feel - all within one cam system. HBT cams will deliver the speed, feel and personalisation required to fit any shooting style.
The HBT is the first binary style cam for a target bow that Hoyt has offered. This also means it does not run a yoke in the cable system.
- ¼" draw length adjustments
- Adjustable let-off of 65, 70 or 75%
- Adjustable wall - hard or soft
- Multiple cam and mod sizes for optimal performance across the draw length range
Enhanced riser design
Machined from aircraft grade aluminium with tunnels near the top and bottom pockets for increased stiffness and stability, increasing accuracy and giving shooters a more steady hold at full draw.
Competition performance grip
A more narrow and comfortable grip reduces hand torque and promotes consistency and accuracy.
In-Line Integrate rest mounting option
Integrate arrow rest mounting option allows for the use of streamlined, modern rest systems along with traditional, berger hole mounted arrow rests capable of dual mounting screws.
Altus 35 is also available and is sold separately.
Altus 38 is available in Pitch Black, Lava Red, Electric Blue and Smoke Grey.
As part of your bow purchase, you receive a Hoyt promo kit comprising
- An 18 page Owner's Manual
- Hoyt Decal
- Warranty Registration Card
- Hoyt Wrist Band
- Hoyt Cap
Specs at a glance
- ATA speed 319fps
- Weight ranges 30-40lbs, 40-50lbs, 50-60lbs and 60-70lbs. Please specify draw weight
- Draw length range 29.75"-31", 28.25"-29.5", 26.75"-28", 24.25"-26.5". Please specify draw length
- Brace height 7.375"
- Axle to Axle 38.25"
- Mass weight 4.8lbs
- Adjustable Let-Off 65%, 70% and 75%
- HBT Cam, extremely adjustable with ¼" draw length adjustments with ability to change between soft or hard wall feel
- Aluminium Riser precision machined with integral grip with geometry that allows for forgiveness while optimising speed
- Parallel split limb technology
- Uniform Stress Distribution
- Multi layer lamination limbs
- FUSE Custom Strings and Cables built rock-solid
- Roller Cable Guard system
- Front and rear hard lock stabiliser mounts
- Available in Right Hand and Left Hand. Please specify RH or LH
- Available in Pitch Black, Lava Red, Electric Blue and Smoke Grey. Please specify colour choice
The new Hoyt Altus 38. Make the new Altus 38 all you. Order your Altus today. Get Serious. Get Hoyt.
| BOW FEATURES | |
|---|---|
| Bow Cams: | HBT |
| Limbs: | Parallel split |
| Speed: | 319 feet per sec. |
| Axle to Axle: | 38.25 inches |
| Brace Height: | 7.375 inches |
