AAE Bitz Knob Nock Receiver

Every archer who has fletched their own arrows on the most frequently used fletching jig in archery, the famous Bitzenburger Fletching Jig, knows the frustration of uneven spacing between vanes.

The solution to this problem resides in the consistency and the accuracy of the index dimples inside the jig.

Regardless of your preferred vane configuration, the Bitz Knob Nock Receiver by AAE will ensure consistent vane spacing. All three-vane indexing options match original, 120 degrees, 90 degrees, & 75 degrees x105 degrees.

In addition to the incredibly accurate vane location, the Bitz Knob uses a wedge design that forces the nock down into the same location every time with a specific thickness to allow for positive nock engagement whether you are using target or hunting nocks.

This feature allows for the most consistent and repeatable fletching from the smallest to the biggest nocks without multiple inserts, adapters or unnecessary adjustments.

For those who chose to repair 1 vane at a time, the Bitz Knob also features a set screw that allows the nock feature to rotate inside the body for single vane repair alignment without the need to rotate your nock.

The Bitz Knob is a creative and sophisticated way to cater to those archers who enjoy the testing, tinkering and experimenting aspects of archery. It has been tested by professional archers and master builders alike, who attest to it providing exact vane spacing every time regardless of your desired configuration.

• Upgrade your Bitzenburger Fletching Jig with this black anodised 3 and 4 vane fletch nock receiver. Also comes in a number 4 & 5 Orange Bitz Knob which gives you indexing options of 60 degrees, 72 degrees and 90 degrees which is not a stocked item but can be special ordered. Please enquire
• An innovative set screw within the nock receiver allows the replacement of a single vane
• Simply loosen the set screw and rotate the knob to clamp a properly glued vane within the jig, then tighten your set screw and rotate the 120 degrees or 90 degrees to the desired vane location
• The fork within the receiver holds your nocks to maintain consistent vanes on every arrow
• Constructed of anodised aluminium in a black finish
• Measures approximately 1.75 inches long with a 5/8 inch diameter and weighs approximately 1 ounce
• Made in USA

The AAE Bitz Knob Nock Receiver, a precision vane spacing receiver upgrade for the Bitzenburger Fletching Jig.

Get one today for more accurate fletching and watch your fletching really improve.